Power Baseline Acceleration Pull Package - This package is suited for the customer who wants to measure the baseline performance of their vehicle as stock, or before future performance modifications are performed. Included printed dyno graphs can also be used for future reference.

Package Includes*:

• Free vehicle hook-up and disconnection

• Three, accurate chassis dyno acceleration pulls

• Printed, graphic or numeric dyno graphs

• Saved dyno information on your floppy disc

$87.00

*Each additional acceleration pull after the initial three is $25.00/ea.

Diagnostic Baseline Dyno Session - This chassis dyno session is designed for the customer who has already completed performance modifications to their vehicle and would like to gauge where the engine's air/fuel ratio is and to measure rear wheel horsepower before a dyno tuning session begins. Air/fuel sampling is taken directly from the header pipe to insure total AFR graphing accuracy.

Session Includes:

• Free vehicle hook-up and disconnection

• Three, accurate chassis dyno acceleration pulls

• AFR sensor bung, plug and installation labor

• Graphing of the engine's air/fuel ratio graphically or numerically

• Data logging of ECM/PCM parameters (when available)

• Professional consultation

• Saved information on your floppy disc

$145.00

Chassis Dyno Rental (w/out graphing) - This rental option is designed for individuals or companies that wish to rent the chassis dyno only for product testing or for diagnostic purposes such as tracking down an elusive drivetrain noise or simulating a road driving condition without actually driving on the road. This service is especially useful to service technicians in the auto repair industry that need to emulate actual road driving conditions to accurately and swiftly diagnose and repair problem vehicles right the first time. (no vehicle service permitted by the individual or technician while vehicle is at DTE)

Chassis Dyno Rental/Hr
$72.00/hr.

Chassis Dyno Rental (with graphing) - This option is designed for individuals or companies that wish to test and gauge a particular product's performance or an engine combination that they have assembled. This is very useful for those who wish to make ECM/PCM calibration changes themselves so that they can measure the power output of their vehicle's engine after the change has been made. (vehicle service by the individual or technician is limited to electronic calibration changes only while at DTE)

Chassis Dyno Rental/Hr. Includes:

• Free vehicle hook-up and disconnection

• Unlimited, accurate chassis dyno pulls

• Printed, graphic or numeric dyno graphs

• Saved dyno information on your floppy disc

$100.00/hr.

Wideband Air/Fuel Ratio Graphing Option 1 (from tailpipe) - This option is available as a dyno test add-on for the customer that wishes to monitor and measure the air/fuel ratio of their vehicle's engine from the exhaust tailpipe. Option 1 is especially useful for those customers who have special exhaust systems or high performance exhaust component coatings that they do not want disturbed by the installation of our AFR sensor bung.

Option 1 Includes:

• Engine exhaust sampling via a probe placed in the tailpipe

• Graphing of the engine's air/fuel ratio graphically or numerically

• Saved AFR information on your floppy disc

• One time charge per package or test session

$25.00

Wideband Air/Fuel Ratio Graphing Option 2 (from header pipe) - This option is available as a dyno test add-on for the customer that wishes to monitor and measure the air/fuel ratio of their vehicle's engine more accurately than option 1 by sampling exhaust from the header pipe. The closer the wideband oxygen sensor is to the engine, the more accurate the corresponding AFR measurement will be.

Option 2 Includes:

• Engine exhaust sampling via our AFR sensor installed in the header pipe

• AFR sensor bung, plug and installation labor

• Graphing of the engine's air/fuel ratio graphically or numerically

$60.00

EFI Vehicle Dyno Tuning - This option is designed for individuals that have completed performance modifications to their vehicle and request that DTE write a custom, accurate and powerful ECM/PCM calibration that maximizes the power output and drivability of the vehicle's combination. We perform 90% of the testing and tuning of the vehicle on the chassis dyno and finalize the remaining 10% of drivability in real world testing by driving the vehicle on the road.

EFI Dyno Tuning/Hr. Includes*:

• Free vehicle hook-up and disconnection

• Unlimited, accurate chassis dyno pulls with AFR sensor use

• Printed, air/fuel ratio graphs both graphically and numerically

• Printed, power output graphs both graphically and numerically

• Data logging of ECM/PCM parameters

• Custom calibration of the vehicle's ECM/PCM to maximize total performance

• Saved dyno information on your floppy disc

$150.00/hr.

*Option 2 is required when this type of tuning is performed due to it's increased accuracy.

Carbureted Vehicle Dyno Tuning - This option is designed for individuals that have completed performance modifications to their vehicle and request that DTE tune and dial in their combination to deliver the excellent drivability and maximum performance that dyno tuning will deliver.

Carbureted Dyno Tuning/Hr. Includes*:

• Free vehicle hook-up and disconnection

• Unlimited, accurate chassis dyno pulls with AFR sensor use

• Printed, air/fuel ratio graphs both graphically and numerically

• Printed, power output graphs both graphically and numerically

• Correct adjustment of float levels, idle mixture, WOT throttle opening, Idle speed, choke, fast idle cam, part throttle jetting, main jetting, ignition timing and valvetrain.

• Professional consultation

• Saved dyno information on your floppy disc

$130.00/hr.

*Option 2 is required when this type of tuning is performed due to it's increased accuracy.

Group Dyno Rental - This option is designed for car clubs and groups of individuals that would like to rent the dyno for the day, which makes the dyno rental cost per customer cheaper as they divide the rental cost among the attending members. Any number of vehicles may attend and prizes will be awarded to the person who has the most powerful vehicle of the day.

Group Dyno Rental Includes:

• Free vehicle hook-up and disconnection

• 8 hours of chassis dyno rental time

• Unlimited, accurate chassis dyno pulls

• Use of our wideband air/fuel ratio sensor during pulls

• Printed, air/fuel ratio graphs both graphically and numerically

• Printed, power output graphs both graphically and numerically

• Professional consultation

• Saved dyno information on your floppy disc

$895.00/day

General Shop Labor Rate
$72.00/hr.

NOTE: Any parts, chemicals, lubricants, hardware or components used by DTE to successfully complete the dyno session will be additional.

Any vehicle on the chassis dyno that is need of repair or modification to complete a successful tuning session will be subjected to an additional charge of the regular shop labor rate to correct the problem before dyno tuning can commence.

DynoTech Engineering Inc.
815 Lawrence Drive
Fort Wayne, IN 46804
(260) 407-5455
info@dynotech-eng.com

[ Home ] [ What's New ] [ H2 Hummer Performance ] [ C5 Corvette Performance ] [ C6 Corvette Performance ] [ Chassis Dyno Service ] [ Engine Dyno Service ] [ Performance Products ] [ Performance Services ] [ Facility Tour ] [ DTE Classifieds ] [ Events Calendar ] [ 400 Horsepower Club ] [ 500 Horsepower Club ] [ 600 Horsepower Club ] [ 800 Horsepower Club ] [ 900 Horsepower Club ]