DTE offers this bulletproof street or brute strength transmission upgrade as an option to all of our installed high performance engine packages to handle the additional power and torque loading that the transmission will encounter. It can be purchased out the door, or installed with one of our performance packages. Shifts are clean and crisp at part throttle and very firm at WOT, which provides long transmission life. Only the best components are used in it's construction and each transmission is thoroughly tested to insure proper function and durability. Our transmissions are comfortable behind stroker engines, N2O, blown applications and anything in between. If your vehicle is producing big power, then consider a high performance automatic transmission from DTE!

• Complete removal, disassembly and inspection
• Modified internal rotating components to street/strip specs.
• Torrington bearings throughout (where used)
• Modified pump to street/strip specs.
• High performance 9 disc clutch packs throughout (where used)
• High performance 2nd gear band
• Reprogram valve body for high performance shifting strategies
• High performance bearing kit
• Heavy duty sun gear shell
• Heavy duty 28 element sprag
• Heavy duty 13 vane pump
• Modified input drum for street/strip use
• New electrical components and solenoids
• Extra capacity oil pan w/ OEM integral drain plug & extended oil pickup tube
• High performance seals, gaskets and filters
• Billet 2-4 apply piston & servo
• Painted exterior for aesthetics and anti-corrosion
• Chassis dyno testing
• Custom PCM calibration (installed packages only)
• DTE's written, limited 2yr./26,000 mile warranty

Options:

• Torque Converter Upgrade: (see our C5 Torque converter section for more details)

All prices are with your usable core. Core charge-$600.00
DTE installed transmissions will receive custom PCM calibration for performance shifting strategy at no extra charge.
Both options are strongly recommended for high horsepower applications.
Any internal transmission hard part replacement is additional.

• Fluid, filter and gasket change
• Removal and inspection of valve body
• Installation of performance shift kit
• Reassembly of internal components to OEM spec.
• OEM recommended transmission fluid
• Chassis dyno testing
• 1 yr./10,000 mile warranty on materials and workmanship

DynoTech Engineering Inc.
815 Lawrence Drive
Fort Wayne, IN 46804
(260) 407-5455
info@dynotech-eng.com

[ Home ] [ What's New ] [ H2 Hummer Performance ] [ C5 Corvette Performance ] [ C6 Corvette Performance ] [ Chassis Dyno Service ] [ Engine Dyno Service ] [ Performance Products ] [ Performance Services ] [ Facility Tour ] [ DTE Classifieds ] [ Events Calendar ] [ 400 Horsepower Club ] [ 500 Horsepower Club ] [ 600 Horsepower Club ] [ 800 Horsepower Club ] [ 900 Horsepower Club ]